Top Flite Giant P-51D Mustang ARF 2.1-2.8,84.5"

• Construction: Fully sheeted balsa and plywood with pre-painted fiberglass fillets
• Wing: One-piece, built up wood frame which is then sheeted with wood
• Covering: Factory applied Top Flite MonoKote in color scheme to recreate WWII's "Big Beautiful Doll" flown by Col John D Landers
• Radio Compartment: Easily accessible, plywood reinforced
• Cowling: Fiberglass, Pre-Painted
• Canopy: Clear, single
• Landing Gear: Fixed heavy duty wire (¼"), but is also set up to use optional Robart retracts with functional landing gear doors
• Dual Wing Servos: Two servos per wing half (1 Flap, 1 Aileron)
• Spinner: 5" (127mm) Aluminum
• Cockpit Kit: Pre-Painted ABS plastic with decals
• Building Time: Ready to fly in only 25-30 hours.

Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent ¼" (6mm) fixed main landing gear, 5" (127mm) main wheels 2" (51mm) tailwheel,  djustable engine mount, 32oz (960cc) fuel tank with glow stopper (for gas use ,not included), 5" (127mm) spinner, wood servo trays and wing joiner, extensive hardware package and photo-illustrated instructions also includes full set of colored decals

Engine: 2.1 -2.8 cu in (34.5 - 46cc) 2-stroke OR 2.5 -4.3 cu in (41-70 cc) spark ignition gasoline engine
Muffler: Pitts style
Radio: 5 - 7 channel
Servos: 10-11 Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder, 2-Flaps, 1-Tail Steering, 1-Air Control Valve)
(a high torque servo is suggested for the rudder, but not required)
Servo Extensions: (2) 24" Extension, (1) Dual Servo Extension (4) 6" Extensions
Y-Harness: (1) Y-harness for flaps
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.

Wingspan: 84.5" (2146mm)
Wing Area: 1245 sq in (80.3 sq dm)
Weight: 19 - 24 lbs (8.61 - 10.88kg)
Wing Loading: 32 - 35 oz/sq ft (98 - 107 g/sq dm)
Length: 73.5" (1865mm)
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 4-9/16" (116mm) Back from the wing's leading edge
Control Throws: High Rate Low Rate
Elevator: Up & Down 9/16" (14mm) 3/8" (10mm)
Rudder: Right to Left 1½" (38mm) 1" (25mm)
Ailerons: Up & Down ¾" (19mm)up ½" (13mm)up 5/8" (16mm)down 3/8" (10mm)down
Flaps: 1-3/16" (30mm) 2-1/8" (55mm)