Description
MKSDS95I MKS DS95i (0.038 sec/60ﾰ - 2.40 kg-cm (33.33oz/in) @6V) Micro Servo
MKS DS95i - Tail Rotor Servo
Specifications
| Modulation: | Digital |
| Torque: | 4.8V: 26.66 oz-in (1.92 kg-cm) 6.0V: 33.33 oz-in (2.40 kg-cm) |
| Speed: | 4.8V: 0.05 sec/60° 6.0V: 0.04 sec/60° |
| Weight: | 0.75 oz (21.2 g) |
| Dimensions: | Length:0.91 in (23.0 mm) Width:0.47 in (12.0 mm) Height:1.07 in (27.3 mm) |
| Motor Type: | Coreless |
| Gear Type: | Titanium |
SPECIFICATIONS:
SKU: MKS-DS95i
Dead Band: 0.001ms (Default)
Control System: +Pulse Width Control
Working Frequence: 760�s / 560hz
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
360ﾰ Modifiable: YES
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Programmable: NO
Connector Wire Length: 20.0 cm (7.86 in)
Additional Information
Max Voltage: |
6.0v |
Min Voltage: |
4.8v |
Features: |
Tail Rotor Servo |
Gear Material: |
Titanium |
Modulation: |
Digital |
Motor: |
Coreless |
Servo Name: |
DS95i |
Power: |
4.8v - 6.0v |
Size: |
Micro |
Speed 4.8V: |
0.01 sec/60° - 0.09 sec/60° |
Speed 6.0V: |
0.01 sec/60° - 0.09 sec/60° |
Torque 4.8V: |
20-29 oz - in |
Torque 6.0V: |
30-39 oz - in |
Weight: |
.5 - .99 oz |
