Futaba S3004 Standard Ball Bearing Servo
FUTS3004 Futaba S3004 Standard Ball Bearing Servo
Availability: In stock
Futaba S3004 - Standard Ball Bearing Servo
|Torque:||4.8V: 44.00 oz-in (3.17 kg-cm)
6.0V: 57.00 oz-in (4.10 kg-cm)
|Speed:||4.8V: 0.23 sec/60°
6.0V: 0.19 sec/60°
|Weight:||1.31 oz (37.0 g)|
|Dimensions:||Length:1.57 in (39.9 mm)
Width:0.79 in (20.1 mm)
Height:1.42 in (36.1 mm)
This is the Futaba S3004 Light Weight, Ball Bearing Servo.
This basic servo is used in cars, boats, or where standard servos are used.
Note: This servo is not designed for use with glow-powered helicopters.
This is a replacement for the following servos.(S15)
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
- Single ball bearing on output shaft
- Precise tight fit throughout the geartrain
- Being standard size and lightweight, it fits many applications.
- Three pole motor
- Nylon gears
- One year warranty
One S3004 standard servo with preinstalled round servo horn(FSH6W)
Four brass eyelets
Four Black one-piece rectangular rubber grommets (FUTM2348)
Four servo mounting screws
Three servo horns (1 lg. round, 1 lg."X" and 1 sm. "x")
Speed: 0.23 sec/60° @ 4.8V 0.19 sec/60° @ 6.0V
Torque: 44 oz-in (3.2 kg-cm) at 4.8V 57 oz-in (4.1 kg-cm) at 6.0V
Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm)
Weight: 1.3 ounce (1-5/16oz) (37 grams)
Connector: "J" type with approx. 5" wire
- Ok Servo