Description
FUTS148 Futaba S148 Servo Standard Precision
Futaba S148 - Servo Standard Precision
Specifications
Modulation: | Analog |
Torque: | 4.8V: 33.30 oz-in (2.40 kg-cm) 6.0V: 41.70 oz-in (3.00 kg-cm) |
Speed: | 4.8V: 0.28 sec/60° 6.0V: 0.22 sec/60° |
Weight: | 1.57 oz (44.4 g) |
Dimensions: | Length:1.57 in (39.9 mm) Width:0.79 in (20.1 mm) Height:1.42 in (36.1 mm) |
Motor Type: | 3-pole |
Gear Type: | Plastic |
The S148 Standard Servo yields increased power and speed with a reduced size and weight compared to the S128, yet uses the same gears and servo cases.
This servo is a replacement for the following servos.(S6,S17,S18,S23,S26,S28 S38,S128)
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
Includes: |
One S148 Standard Precision Servo w/"J" connector and metal top bushing
One accessory package with round rubber grommets, brass eyelets, mounting screws, round and star shaped servo horn
Nylon gears
One year warranty
Technical Specifications: |
Control system: Pulse width control, 1.52ms neutral
Motor: 3-pole
Power requirement: 4.8V or 6V (from receiver)
Power consumption: 6V 8mA (at idle)
Torque: 33 oz-in (2.4 kg-cm) @ 4.8V 42 oz-in (3.0 kg-cm) @ 6V
Transit Time: 0.28 sec/60° @ 4.8V 0.22 sec/60° @ 6V
Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm)
Weight: 1.6oz (1-9/16oz) (44g) Mounting on-center dimensions
Width: .4"
Length: 1.9"
Shaft Diameter: 5.88mm
Manuals:
Additional Information
Max Voltage: |
6.0v |
Min Voltage: |
4.8v |
Gear Material: |
Nylon |
Modulation: |
Analog |
Motor: |
3- Pole |
Servo Name: |
S148 |
Power: |
4.8v - 6.0v |
Size: |
Standard |
Speed 4.8V: |
0.20 sec/60° - 0.29 sec/60° |
Speed 6.0V: |
0.20 sec/60° - 0.29 sec/60° |
Spline: |
F3 |
Torque 4.8V: |
30-39 oz - in |
Torque 6.0V: |
40-49 oz - in |
Weight: |
1.5 - 1.99 oz |