Description
DTXP4100 Duratrax IntelliPeak AC/DC Pulse Charger
Note: Graves RC Coupons are not applicable with this product
This is an IntelliPeak AC/DC Pulse Charger for Charging/Discharging Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) Battery Packs. Note: Do Not Discharge Battery Cells smaller than Sub-C Size ("Sub-C" is one size smaller than a "C" size). *** Five-Year Warranty ***
Features:
- Peak charges Nickel-Cadmium batteries using specialized peak charging technology as well as Nickel-Metal Hydride batteries, plus Discharging and Cycling features not commonly found in other chargers.
- "Negative Delta V" Peak Detection for NiCds and NiMHs
- Built-in Artificial Intelligence to eliminate false peaks
- Auto-identifies the quantity of cells being charged
- Computerized control, 8-bit 4MHz CPU with 8K ROM, 1K RAM, 1-channel 16-bit analog-to-digital converter.
- High efficiency P-Channel MOSFET drive transistors
- 11-15V DC input
- Built-in AC Power Supply
- Output: 4-7 cells on DC, 4-8 cells on AC
- Adjustable fast Charge current of .5-4A AC, .5-6.5A DC (Note: 3A maximum Charge rate recommended with NiMH packs.)
- Pulsed fast Charge, with 8-bit pulse width modulated current control output.
- 100mA TRICKLE Charge
- 1A fixed Discharge rate. Fixed 2.60V Discharge cutoff voltage- (see COMMENTS). Not designed for Discharging A or AA size (and smaller) cells (see COMMENTS).
- Cycle functions: Select a single Discharge/Charge cycle for periodic pack conditioning, or continuous "auto-repeat" cycles for reviving batteries that have developed a memory, or breaking in a new pack.
- Four multi-function, high intensity LED indicators. Status light glows during charge, flashes when nearing peak.
- Audible mode select tone signals for easy set-up
- Reverse polarity and fused overload protection
- Designed to charge sub-C battery packs.
Includes:
- One IntelliPeak AC/DC Pulse Charger w/5' AC Power Cord
- One Standard Battery Connector with wire lead (Kyosho-type)
- One DC power cord with alligator clips
- One Instruction Sheet
- One DuraTrax Decal Sheet
Requires:
- DC power source of 11-15V OR AC 110V AC (US Standard)
- Battery pack with and Standard Connector (Tamiya-type)
Technical Specifications:
- Battery Types: Nickel-Cadmium (NiCd) Nickel-Metal Hydride (NiMH)
- Charger Type: Pulsed Current, Peak Detecting
- Peak Detection Method: Negative Delta V
- AC Input Voltage: 110V (US Standard AC)
- DC Input Voltage: 11-15V
- Number of Cells: 4-7 cells DC or 4-8 cells with AC Power Supply
- NiCd Fast Charge: .5-4A AC .5-6.5A DC
- NiMH Fast Charge: .5-3A (3A is the maximum recommended rate)
- TRICKLE Charge Rate: 100mA
- Discharge Rate: 1A fixed
- Discharges down to a fixed voltage of 2.6V.
- Width: 3"
- Height: 3.125"
- Depth: 5"
- Weight- Charger: 3lb
- Meter Display: No
- Fuse: 3A mini buss
