null
COBRA

INDC-2213-18 Cobra C-2213/18 Brushless Motor, 1350KV

(No reviews yet) Write a Review
SKU:
INDC-2213-18
$28.99

Description

INDC-2213-18 Cobra C-2213/18 Brushless Motor, 1350KV

 

The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

To complete the package, a complete hardware accessory kit is included with every Cobra Motor. Included in this hardware kit are the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 4 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing

Cobra C-2213/18 Motor Specifications
 Stator Diameter  22.0 mm (0.866 in)
 Stator Thickness  13 mm (0.512 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  18 Turn Delta
 Motor Kv Value  1350 RPM per Volt
 No Load Current (Io)  0.68 Amps @ 8 Volts
 Motor Resistance (Rm) per Phase  0.102 Ohms
 Motor Resistance (Rm) Phase to Phase  0.068 Ohms
 Maximum Continuous Current  20 Amps
 Max Continuous Power (3-cell Li-Po)  220 Watts
 Motor Weight  61.0 grams (2.15 oz.)
 Outside Diameter  27.7 mm (1.091 in.)
 Shaft Diameter  3.17 mm (0.125 in.)
 Motor Body Length  28.0 mm (1.102 in.)
 Overall Shaft Length  42.0 mm (1.654 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8kHz
View AllClose

Additional Information

Motor Kv:
1,001 to 2,000Kv
Motor ESC Amps:
15 to 34A
Motor Voltage:
7.4 to 14.7V
Motors:
Motor
View AllClose