Description
INDC-2204-32 Cobra C-2204/32 Brushless Motor, Kv=1960
Cobra C-2204/32 Brushless Motor, Kv=1960
The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a cross mount built right into the back plate for easy installation on your model.
Includes:
Four M2x8mm Motor Mount Screws
O-ring prop adapter with 2 screws
20mm dia. x 2mm O-Ring
Technical Specifications:
| Stator Diameter | 22.0 mm (0.866 in) |
| Stator Thickness | 4.0 mm (0.157 in) |
| Number of Stator Slots | 12 |
| Number of Magnet Poles | 14 |
| Motor Wind | 32 Turn Delta |
| Motor Kv Value | 1960 RPM per Volt |
| No Load Current (Io) | 0.58 Amps @ 8 Volts |
| Motor Resistance (Rm) per Phase | 0.153 Ohms |
| Motor Resistance (Rm) Phase to Phase | 0.102 Ohms |
| Maximum Continuous Current | 12 Amps |
| Max Continuous Power (2-cell Li-Po) | 90 Watts |
| Max Continuous Power (3-cell Li-Po) | 130 Watts |
| Motor Weight | 22.5 grams (0.79 oz.) |
| Outside Diameter | 27.0 mm (1.063 in.) |
| Shaft Diameter | 3.00 mm (0.118 in.) |
| Motor Body Length | 14.2 mm (0.559 in.) |
| Overall Shaft Length | 21.8 mm (0.858 in.) |
| Motor Timing | 5-10 degrees |
| PWM Frequency | 8 KHz |
Manuals:
Additional Information
Motor Kv: |
1,001 to 2,000Kv |
Motor ESC Amps: |
14A or Less |
Motor Voltage: |
7.4 to 14.7V |
Motors: |
Motor |
