Description
IND-C100A-ESC Cobra 100A ESC with 6A Switching BEC
Cobra 100A ESC with 6A Switching BEC
Features:
- Easy Set-up and Operation
- Basic Programming available through Throttle Stick
- Throttle Range automatically detected and set for smooth, linear throttle response
- Three different types of Low Voltage Cut-off available for Li-Po, Ni-XX or LiFe batteries
- Three different LVC levels for each cell type: 3.2, 3.0 or 2.8 Volts/cell for Li-Po batteries, 0.9, 0.8 or 0.6 Volts/cell for Ni-XX batteries and 2.8, 2.5 or 2.2 Volts/cell for Li-Fe batteries
- LVC type can be set to Hard Cut-off or Power Reduction Mode
- Three different brake levels, Hard, Medium or Off
- Three different timing modes, High, Low and Auto
- Three different Motor Acceleration Rates, High, Medium and Low
- Safe Start-Up: The ESC will not arm until the throttle is in the idle position
- Locked-Rotor Protection: If the motor is blocked so the prop cannot rotate, the ESC will automatically shut down to prevent damage
- PWM Frequency is set to 8KHz for best operation on a wide range of motors
- Over Temp Protection: Shuts down the ESC output if temperature exceeds 230F (110C)
- Auto Power Cut-off: If the throttle signal is lost for more than 3 seconds, the throttle will reduce to idle to prevent fly-aways.
Specifications:
| Weight (Without Connectors) | 69.8 grams (2.46 oz) |
| Max Continuous Current | 100 Amps |
| Burst Current rating (15s) | 125 Amps |
| Operating Voltage Range | 6 to 26 Volts |
| Number of Li-Po cells | 2 to 6 cells |
| Number of Ni-XX cells | 6 to 20 cells |
| Number of Li-Fe cells | 2 to 7 cells |
| Switching BEC Output | 6 amps @ 5.5 Volts |
| ESC Size (Inc. Caps, in mm) | 72 x 33 x 14 |
| ESC Size (Inc. Caps, in inches) | 2.83 x 1.30 x 0.55 |
Additional Information
ESC Max Amps: |
100A or Greater |
ESC Max Voltage: |
22.2V to 29.5V |
ESCs & BECs: |
Brushless ESC |
