Description
CSEPHXHV45 CASTLE CREATIONS PHOENIX-45 HI-VOLT BRUSHLESS ESC
Features:
- Extremely Low Resistance (.003 Ohms)
- High rate adjustable switching
- Up to 45A max continuous current
- Dual Opto-Coupled (No BEC)
- Up to 36 cells or 12s Lithium Polymer - Maximum
- 16 cells or 3s Lithium Polymer - Minimum
- 13AWG wiring for motor and battery leads
- Dynamic braking ensures folding props fold promptly
User Programmable Features:
-Low-voltage cutoff with Auto-LiPo detect as default
-Over-current Protection
-Brake Type
-Throttle Range - fixed/self-adjusting/governor
-Timing Advance
-Cutoff Type
-Soft Start ramp up
-Switching Frequency
- Runs motor in forward OR reverse
- Overtemp Motor Cutoff with Reset
- Safe "Power ON" arming program ensures motor will not accidentally turn ON
- Low torque "soft start" prevents damage to fragile gearboxes
- Auto Shut Down when signal is lost or because radio interference
Includes:
One PHOENIX-45 High Voltage speed control w/Universal connector
One set of instructions
One small "Castle Creations" decal
Requires:
Bullet-type motor connectors.
Suggested Connectors: 3.5mm
Battery Connectors - depends which connector is used on battery.
Suggested Connectors: Ultra plugs
Technical Specifications:
Speed control body length: 2.6" (66mm)
Speed control body width: 1.0" (25.4mm)
Speed control body thickness: 0.5" (13mm)
Motor wire lead length: 4.8" (122mm)
Battery wire lead length: 6.0" (152mm)
Servo wire lead length: 11" (280mm)
Continuous current: 45A
Up to 36 cells or 12s Lithium Polymer: Maximum
16 cells or 3s Lithium Polymer: Minimum
Wire size for motor and battery leads: 13AWG
Manuals:
Additional Information
ESC Max Amps: |
40A to 59A |
ESC Max Voltage: |
44.4V or Greater |
ESCs & BECs: |
Brushless ESC |
