BETAFPV Beta85X 4K Whoop Quadcopter (4S) - PNP

BETAX85WHOOP4KPNP BETAFPV Beta85X 4K Whoop Quadcopter (4S) - PNP

SKU: BETAX85WHOOP4KPNP
Only 1 left

Availability: In stock

$249.99

This Product Ships the Same Day when in stock.

Call us now at 407-294-0012 for any questions about this product

Contact Customer Service for Returns of this Product.

Details
Details

Features:

  • F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
  • High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD). Faster input signals with lower latency and higher update rate are reachable. 
  • Using single N-channel MosFETs on ESC board which have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board. 
  • Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.
  • Installed with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P.
  • Upgraded 1105 motor from 6000KV to 5000KV,  with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
  • Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
  • 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

Specification

BETA85X SPECIFICATIONS

  • Weight: 88.6g (without battery)
  • F405 V2 Flight Controller and 16A BLHeli_32 ESC
  • Motors: 1105 5000KV with connector
  • Props: 2" 4-Blades Props
  • Camera: CADDX Tarsier 4K
  • Canopy: Canopy for Tarsier 4K camera
  • Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire / PNP
  • Recommend battery: 4S 450mAh Battery(Not including)
  • 5.8G FPV antenna
  • Flight time: 4min - 6min with 450mAh 4S battery

FC SPECIFICATIONS

  • CPU: STM32F405 (Overclock to 240MHz)
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD (OBSD)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

  • Support BLHELI_32
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
  • Input voltage: 3-4S lipo
  • Cotinue current: 16A
  • Peak current: 19A 
  • Firmware target: BETAFPV-16A-32bit
  • MCU: STM32F051K66

Camera SPECIFICATIONS

  • Weight: 19.5g
  • FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
  • Lens: Dual lens 2.8 / 12Mega
  • Image Sensor: 12M SONY sensor
  • TV System: NTSC / PAL, can be changed
  • Anti-Shake: Hardware anti-shake
  • Scene Mode: Auto / Personage / Scenery / Defog
  • Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
  • Horizontal Resolution: 1200TVL
  • Image: 16:9 / 4: 3 (changeable)
  • Camera OSD: Seperate OSD
  • The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.
Specifications
Specifications
EXT INFO No
Technical Specifications No
Oversized Item No
Manufacturer BETAFPV
Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.