TOPA0906 Top Flite Cessna 182 Skylane GP/EP Gold Edition ARF 81"

TOPA0906 Top Flite Cessna 182 Skylane GP/EP Gold Edition ARF 81"

THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING

Note: Graves RC Coupons are not applicable with this product  

Features:

• Construction: Balsa and ply
• Wings: One-piece with plywood wing joiner
• Aileron Control: Dual servo
• Covering: Top Flite MonoKote
• Cowl: Painted fiberglass
• Cockpit Detail: Seats and instrument panel
• Lights: Two landing lights in cowl, one navigational light on each wing and red MARS beacon light on top of fin (requires separate receiver battery)
• Spinner: Polished aluminum, 2.25" (57mm) diameter
• Landing Gear: Main, two piece fiberglass, Nosegear 0.20" (5mm) diameter prebent wire
• Wheel Pants: Constructed of fiberglass, white in color
• Wheels: Three foam, two main 3.25" (82mm) diameter, one nosewheel 2.75" (70mm) diameter
• Engine Mount: Two-piece composite
• Fuel Tank: 14oz (420cc)
• Building Time: Ready to fly in 15-20 hours

Includes:

Top Flite Cessna Skylane Gold Edition Airplane with decals, all hardware, clear plastic windshield and side glass, fiberglass tail cone, engine mount, cowl, three wheels, instruction manual and wheel pants

Requires:

Engine: .60-.91 cu in (10-15cc) two-stroke OR
.91-1.20 cu in (15-20cc) four-stroke OR
Motor: Rimfire 120 (50-65-450) Outrunner
LiPo Batteries: Two connected in series if using electric motor
Radio: 6-channel
Servos: Six standard with at least 44oz/in (3.2kg/cm) torque
24" (610mm) Servo Extensions: Two for ailerons
12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip lights
Y Harnesses: Two for aileron and flap surfaces
Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights

Specifications:

Wingspan: 81 in (2060mm)
Wing Area: 898 sq in (57.9 dm2)
Weight: 11.5 - 12.5lb (5220 - 5670g)
Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm)
Length: 64 in (1630mm)
Airfoil: Semi-symmetrical
CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of
the wing
Control Throws- Low Rate High Rate
Elevator: 3/4" (19mm) 10ﾰ 1-1/16" (27mm) 15ﾰ
Rudder: 5/8" (16mm) 9ﾰ 1" (25mm) 15ﾰ
Ailerons: 1/2" (13mm) 14ﾰ 5/8" (16mm) 17ﾰ
Flaps: 1/2 - 1" (25mm) 18ﾰ down
full - 2" (51mm) 36ﾰ down