INDC-2814-16 Innov8tive Designs Cobra C-2814/16 Brushless Motor, Kv=1050

INDC-2814-16 Innov8tive Designs Cobra C-2814/16 Brushless Motor, Kv=1050

Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2814 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 2814 Series Motor is a complete accessory package which contains the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 4 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing

Specifications

• Stator Diameter: 28.0 mm (1.102 in)
• Stator Thickness: 14.0 mm (0.551 in)
• Number of Stator Slots: 12
• Number of Magnet Poles: 14
• Motor Wind :16 Turn Delta
• Motor Kv Value: 1050 RPM per Volt
• No Load Current (Io): 0.90 Amps @ 10 Volts
• Motor Resistance (Rm) per Phase: 0.068 Ohms
• Motor Resistance (Rm) Phase to Phase: 0.045 Ohms
• Maximum Continuous Current: 30 Amps
• Max Continuous Power (3-cell Li-Po): 330 Watts
• Max Continuous Power (4-cell Li-Po): 450 Watts
• Motor Weight: 107 grams (3.77 oz.)
• Outside Diameter: 35.0 mm (1.378 in.)
• Shaft Diameter: 5.00 mm (0.197 in.)
• Motor Body Length: 34.4 mm (1.354 in.)
• Overall Shaft Length: 54.0 mm (2.126 in.)
• Motor Timing: 5-10 degrees
• PWM Frequency: 8 KHz

Manuals:

INDC281416-Prop-Chart-English