 |
 |
 |
|
| UFLM1320 ULTRA FLY FRIO E/10/10 Motor w/Apollo 12 ESC Combo |
|
|
|
|
|
 |
|
 |
|
Features
- Frio E/10/10 1050kV Motor.
- Case constructed of durable composite material.
- Composite motor mount integrated on motor.
- Integrated fan with 12 small blades to reduce running temperatures.
- 12 pole Outrunner construction.
- Sensorless design.
- 3mm, 1/8" shaft with adapter which attaches with 3mm set screw.
- Prop is retained on prop adapter with a .8mm coarse thread and nut.
- 3.5mm bullet pre-soldered male connectors on 20AWG wire.
- Apollo Brushless 12A continuous (16A surge) ESC.
- Dual BEC design provides 2.0A stable continuous current.
- Runs in forward or reverse. (switch any two wires to reverse)
- High rate (12kHz) switching (PWM).
- Handles 5-8 cells with five micro servos.
- Handles up to 10 cells with three micro servos.
- Handles up to 12 cells with two micro servos (17V max input).
- Supports up to 4 micro servos & Gyro on 3S LiPo.
- BEC function till 14V.
- Programming card accesible (UFLM1299).
- User programmable features.
- Motor timing (Auto/Low/Standard/Advanced)
- Brake Type (ON/OFF)
- Voltage cut-off (LiPo auto/5V)
- Low torque soft start feature.
- Safe "Power On" arming program prevents accidental starts.
- Extremely low impedence: 0.015 ohm
- High temp protection circuit.
- 3.5mm female brass bullet connectors on 20AWG wire.
- Micro Red two pin perpendicular connectors on 20AWG wire.
- Universal Rx male connector on 22AWG wire.
|
|
|
 |
|
 |
|
|
|
