RAM62 RAM Servo Fail Safe MkII w/Adjustable Delay

Home > ELECTRONICS >

This is the Ram Servo Fail Safe MkII with Adjustable Delay.

FEATURES: Moves any servo (usually the throttle) to a pre-set fail safe
position if a loss of radio signal is detected or if radio is
switched off by user
Can be preset to delay its response up to 5 seconds to deal with
special uses such as submarines and engine ignition interference

INCLUDES: One Ram Servo Fail Safe MkII with Adjustable Delay with receiver and
servo leads with connectors pre-attached (no soldering required)

REQUIRES: Plugging between receiver and servo and adjusting

NOTE: A JR plug to the receiver and a Futaba socket from the servo
are used. This is the most common combination, BUT the connectors
will not be polarized with other brands of receivers and servos.
If other brands are used, follow the wire color code in the
instructions for proper connections. Airtronics receivers and
servos made prior to 1998 will require an adapter cable (can use
AIRM4400).

Our Price: $29.95

Added: 01 JUN 08

Quantity in Stock: 4
Product Code: RAM62

Qty: