TOPA0155 TF SEA FURY .60 SIZE

Home > AIRCRAFT > LIST BY MANUFACTURER > TOP FLITE >

This is a 1/7 Scale, Radio Controlled, Glow Powered, Balsa and Plywood
Top Flite Gold Edition Hawker Sea Fury MK11 Airplane Kit.
For Intermediate to Advanced Modeler/Fliers.
Recommended for modelers who have mastered low wing airplanes.

In 1942, Britain's Royal Air Force saw the need for a good long range
fighter. But it was the Royal Navy which picked up the Fury and introduced
it to their Air Fleet in 1948. Named the Sea Fury, it proved a capable
warrior, and in 1949 set a speed record flying from London to Rome. The
former warbird is often seen today at events such as the Reno Air Races,
which in 1999 featured eight Sea Fury contenders.

Our Price: $179.97

Added: 01 JUN 08

Quantity in Stock: 2
Product Code: TOPA0155

Qty:

Description

Technical Specs

Extended Information

Warranty: Top Flite Model Manufacturing Company guarantees this kit
free from defects in both materials and workmanship at the date
of purchase.

INCLUDES: All wood to construct the airplane, pushrods, prebent 3/16" wire main
landing gear, 3/32" tailwheel wire, 60-120 nylon adjustable engine
mount, hardware package, fiberglass cowling, clear canopy, decals,
photo-illustrated instructions, full-size rolled plans,
ABS radiator scoop, wing blisters, and landing gear/wheel covers.

REQUIRES: Engine: .61-.91 (10 - 15cc) (2-stroke)(mounts at negative 45 degree)
Muffler- Top Flite In-Cowl Muffler and Header to conceal the
the exhaust inside of the cowling (ONLY FITS 60-75) OR OTHER
OR .91-1.20 (15 - 20cc) (4-stroke)(mounts inverted)
Radio: 4-7 Channel (7th channel might be used if flap servos are
ran separately.)
Servos: 5-8 standard (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
(See COMMENTS for flap and retract servos.)
Servo Extension 6": 3-for ailerons
Y-Harness: 1-for aileron servos
Covering: Three 6 foot rolls (see COMMENTS for colors used on box art
Misc. Items: (2) 4" main wheels, (1) 1" tailwheel, 4" spinner
12 oz fuel tank, glow plug, 1/4" foam rubber padding, 3' medium
fuel tubing, fuel filter, propeller, building and field equipment.

Optional Pneumatic Retracts Requirements, see COMMENTS.
Optional Flaps Requirements, see COMMENTS.
Optional Scale Display Propeller Requirements, see COMMENTS.

COMMENTS: The pilot shown inside the plane is not included, use TOPQ9000 1/7th
scale WWII Full Body Pilot.
Optional cockpit kit, use TOPQ8412.
Optional dummy radial engine, use (9) of WBRQ3200. This will fit
the opening of the cowl, but with a spinner this will not be very
visible.
The airplane pictured on the box was covered in these Top Flite
MonoKote colors: Dove Gray, Insignia Blue, Black, and White.

OPTIONAL PNEUMATIC RETRACTABLE LANDING GEAR OPTIONS-
*ROBART Retractable landing gear required items as follows:
(1) (ROBQ0005) Robart #605HD 90-degree retracts
(3/16" (4.8mm) wire struts)
(1) (ROBQ2302) Robart #188VR air control kit
(1) (GPMQ4278, pkg. of 2) 3/16" x 2" slip-on axles
(1) (ROBQ2395, pkg. of 2) Robart #190 Quick connectors
(1) (ROBQ1518, pkg. of 2) 4" (102mm) main wheels
(1) (ROBQ2363) Robart #164G hand pump with gauge
(1) (HCAM0130) Standard servo to operate the air control valve
(1) (HCAR5000) 3/4 oz. glass cloth to reinforce the wing
sheeting inside the wheel wells.
*CENTURY JET MODELS retractable landing gear required items
as follows:
(1) (CJMQ4150 #32425) Scale Sea Fury landing gear system
-or-
(1) (CJMQ4100 #32325) 1/2" strut Sea Fury landing gear system
-or-
(1) (CJMQ4050 #32225) 3/8" strut Sea Fury landing gear system
(1) (ROBQ2363) Robart #164G hand pump with gauge
(1) (ROBQ1518, pkg. of 2) 4" (102mm) main wheels
(1) (HCAM0130) Standard servo to operate the air control valve
(1) (GPMQ3160, pkg. of 8) #6 x 1/2" mounting screws
(1) (JBWR8265) JB Weld epoxy
(1) (HCAR5000) 3/4 oz. glass cloth to reinforce the wing
sheeting inside the wheel wells.
Optional (1) (ROBQ2368) Robart air filler valve

Optional Flap required items as follows:
(2) (HCAM0130) Standard servos
(1) (HCAM2000) 6" (150mm) Servo extension (receiver to Y-harness)
(1) (HCAM2500) Y-harness
(1) (GPMQ4001, pkg. of 15) 10 Small Pivot Point Hinges
(1) 3/32" (2.4mm) brass tube (drilling holes for hinges)
(K+SR2626, pkg. of 15, but only one is needed)
Optional Scale Display Propeller Requirements as follows:
(3) (TOPQ5241) 22x6-10 (near scale size) Top Flite Propellers-
Cut propellers as shown in the instructions using the provided
template on manual's back cover.

Scale Competition- This airplane may be entered in Fun Scale,
Sportsman Scale and Expert Scale classes in AMA competition.