PMMA0560 PHOENIX F-20 Tigershark .46-.53 ARF
- Wingspan: 56.7" (1440mm)
- Weight: 5.73 lb (2600g)
- Length: 52.8" (1340mm)
- Airfoil: Fully-symmetrical low-wing
- Center of Gravity: 5.9" (150mm) Back from the wing's leading edge at
- the fuselage
- Control Throws-
- Elevator: Up & Down 0.47" (12mm)
- Rudder: Right to Left 0.59" (15mm)
- Ailerons: Up & Down 0.31" (8mm)
INCLUDES:
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent 0.16" (4mm) landing gear, three 2.4" (60mm) wheels,
nylon engine mount, 2.5" (64mm) spinner, 14oz (420cc) approx.
capacity fuel tank, wood servo trays aluminum wing joiner, hardware
package, foam padding and photo-illustrated instructions.
REQUIRES:
Engine: .40 -.46 cu in (6.5 - 7.5 cc) 2-stroke
OR .52 cu in (8.5 cc) 4-stroke
Muffler: Sports-style supplied with engine. Engine mounts on its
side with cowling cut away to expose engine and muffler
Radio: 4-Channel
Servos: 6-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder
1-Nose Gear)
Y-Harness: One, for aileron servos
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
COMMENTS:
The box states that wheel pants are included. This is incorrect-they
are not used with this kit.
|
