 |
 |
 |
|
| HPI10629 HPI Racing 1/5 Baja 5B 2.0 Gas RTR |
|
|
|
|
|
 |
|
 |
|
Features
- Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gunmetal
- anodized, constructed of aircraft grade 6061 T6 aluminum
- Drive: Rear wheel gear drive
- Engine: 2 cycle 1.40 cu in (23cc) gasoline with pull starter,
- updated cylinder that provides 10% more power than original version
- dual element foam air filter, primer, choke and kill switch. Now
- equipped with Torx T27 screws for less wear on tools and screws
- Exhaust: Steel High Flow design with much larger capacity than
- original
- Radio: HPI TF-10 3-channel FM 27MHz with steering and throttle trim
- steering dual rate, transmitter does not have charge jack, 3rd
- channel switch is for optional accessories, receiver has adjustable
- failsafe, 6V 2000mAh rechargeable receiver pack, AC charger
- water resistant housing on chassis with external charging jack and
- rubber cap for easy crystal changes
- Servos: Water resistant with high torque 25kg-cm steering servo
- Receiver Battery: 2000mAh, five sub C-cell 6V rechargeable pack
- Clutch: Automatic centrifugal type, 8000 RPM for quick aceleration
- Ball Bearings: Full set included
- Shocks: Four VVC/HD oil-filled, aluminum body, five externally
- adjustable dampening settings and dual rate springs for progressive
- dampening action on all surfaces
- Main Gear: 57 tooth
- Gearbox: Sealed
- Differentials: Viscous Torque Control can be tuned using different
- weight diff oils, hardened metal planetary gears
- Brakes: Ventilated dual disc
- Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide
- 6.7" (170mm) outer diameter
- Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm)
- wide, 6.7" (170mm) outer diameter
- Wheels: 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel
- to hold tire securely in place-no need for tire glue
- Body: 0.08" (2mm) thick polycarbonate pre-painted in either gray, red
- or blue (see COMMENTS below) with decals applied
- Rear Wing: Molded black plastic with decals applied
- Roll Cage: Baja style high impact nylon protects engine and body
- from crash damage
- Suspension: Fully adjustable, long travel double wishbone
- Caster: Adjustable, with shim 22 / 25.5* stock / 29 degrees
- caster/toe-in refers to the angle of the front
- suspension when viewed from the side of the car in relation to the
- chassis
- Camber: Adjustable, camber refers to the angle of the tops of the
- tires from vertical when viewed from front or behind vehicle
- Warranty: 2-year limited
|
|
|
 |
|
 |
|
|
|
