HCAA17XX HOBBICO NEXSTAR SELECT RTF

Home > AIRCRAFT > LIST BY MANUFACTURER > HOBBICO MODELS >

***Note: This item is oversize/overweight. An additional shipping charge will apply***

HOBBICO NEXSTAR SELECT RTF

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, 2-56 threaded pushrods in lengths of 31", 31", 17", 15" (GPMQ3716) pre-bent main landing gear with three 2-3/4" (70mm) foam main wheels, steerable nose gear, IsoSmooth aluminum and rubber engine mount, 9.1oz (270cc) fuel tank, 2-1/4" (57mm) white plastic spinner glow plug, 11x5 nylon propeller, RealFlight NexSTAR disc with transmitter interface, O.S. Max .46 FXi engine, Futaba 4YBF 4-ch radio system with Tx battery (FUTM1440) Rx battery (FUTM1295) Charger (FUTM1830),AFS Dual Conversion Receiver,linkages, and and photo-illustrated instructions.

Engine: Pre-installed O.S. Max .46FXi (7.5cc) with high-speed needle valve extender/limiter that limits the movement of the high-speed needle to prevent engine from being run too lean, engine is mounted on IsoSmooth Mount to isolate airframe and radio gear from damaging vibration

Radio: Futaba 4YBF 4-channel FM radio with(micro) square trainer port AFS (Active Flight Stabilization) that actively searches for any signs of instability and takes immediate action to correct them.

FEATURES: Construction: Balsa and plywood
Wings: CenterCore Molded Composite Main Wing Rib maintains perfect alignment and includes a built-in aileron servo mount, wing halves are joined with a steel rod.
Flat bottom high mount configuration
One-piece, all wood precision airfoil with SpinControl Airfoil Extensions that provide lift even in a stall to keep the NexSTAR level and the pilot in control.
PivotFlex Wing Mounting System fastens with one nylon bolt, a rubber retainer and pivoting channel absorb minor jolts of normal use, more severe jolts cause the wing to separate from the fuselage and escape the full force of impact.

Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase

Covering: Polyester based heat shrink, color scheme is white and red with silver accents.

Our Price: $399.99

Added: 01 JUN 08

Quantity in Stock: 3
Product Code: HCAA17XX

Qty:

Description

Technical Specs

Extended Information

HCAA17XX HOBBICO NEXSTAR SELECT RTF

Features

This is the radio controlled, glow powered, ready-to-fly, Hobbico NexSTAR Select .46 trainer airplane.
For Beginner Modeler/Fliers.
With such features as AFS (Active Flight Stabilization), SpinControl Airfoil Extensions, SpeedBrakes Training Flaps and much more, no other trainer offers so much help for the first-time pilot.
In addition to the airplane, radio, and engine, this package also includes a RealFlight NexSTAR Windows PC disc with transmitter interface to use with the included Futaba radio allowing the modeler to practice and perfect their skills without risking the airplane.
This system uses on-board electronic sensors that detect instability-just release the sticks and AFS does the rest. Sensitivity is adjustable as pilot gains flight skills.
Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts (U.S. Patent #6,886,780) lock in place with a snap and provide the strongest landing gear of any trainer, also easily removeable
Aileron Control: Single standard size servo, wings are built with dual aileron servo trays for future upgrades as skills increase, can also be equipped with flaps
Tail Mounting: EasyAlign System guides parts into place automatically in perfect alignment without tools
Propeller: 11x5 nylon, black in color with painted tips to aid visibility-available separately, HCAA3744
Building Time: Ready to fly in only 20 minutes
Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component part damaged by use or modification.