 |
 |
 |
|
| GPMA1285 GP MATT CHAPMAN CAP580 1/3S ARF |
|
|
|
|
|
 |
|
 |
|
Features
- FEATURES: Construction: Balsa and plywood
- Wings: Two-piece all wood joined at fuselage with aluminum tube, two
- locations in fuselage for tube placement allow easy center of
- gravity adjustment
- Covering: Top Flite MonoKote, color scheme is yellow with splashes of
- blue, orange, green red and purple, red and white target graphic
- on underside, see COMMENTS
- Radio Compartment: Plywood reinforced, accessible under canopy
- Cowling: Pre-painted, fiberglass-reinforced
- Canopy: Single clear, with pre-painted pilot bust installed, canopy
- is removable for easy access to radio equipment
- Wheel Pants: Pre-painted, fiberglass-reinforced
- Stabilizer: Two piece with aluminum joiners, stab halves remove
- easily for transport
- Landing Gear: 0.24" (6mm) thick painted and prebent aluminum with
- 1.5" (38mm) steerable tailwheel, 0.12" (3mm) diameter tail gear
- Wheels: Two Dubro 4" (102mm) Treaded Lite, DUBQ0845
- Spinner: 4" (102mm) aluminum
- Aileron Control: Dual servo on each wing
- Rudder Control: Dual servo
- Building Time: Ready to fly in 15-20 hours, approximately
- Fuel Tank: 32 oz (960cc) (approximately)
- Engine Mount: Plywood, integrated with fuselage (available only with
- replacement fuselage)
- Hardware: Premium heavy-duty, all hinges, control horns and pushrods
- are included
|
|
|
 |
|
 |
|
|
|
