 |
 |
 |
|
| GPMA1224 GP GIANT SCALE BIG STIK ARF |
|
|
|
|
|
 |
|
 |
|
Features
- FEATURES: Construction: All balsa and plywood
- Wings: One piece, all wood, held to fuselage with two included 1/4-
- 20 wing bolts, wing halves slide together onto an aluminum joiner
- tube
- Covering: Factory applied adhesive backed MonoKote. Color scheme is
- red with the Maltese Cross in black set against a white background
- on the wings, tail section, and top of the fuselage behind the
- wing. For stock numbers of covering used, see COMMENTS
- Radio Compartment: Easily accessible under wing, plywood reinforced
- Landing Gear: Pre-formed aluminum 0.16" (4mm) thick main gear, with
- 0.20" (5mm) diameter nose gear wire, 0.10" (2.5mm) diameter tail
- gear
- Instructions included for installing taildragger landing gear
- (used with most gasoline powered planes) or tricycle style which
- provides easier ground control with a steerable nose wheel
- Engine Mount: Composite construction, adjustable
- Fuel Tank: Approximately 16oz (480cc) for use with glow fuel only, if
- using with gasoline engine a Sullivan Conversion Kit (SULQ2684),
- Dubro Fuel Line Barbs (DUBQ0670), and Gasoline Fuel Tubing
- (GPMQ4135) must be used
- Wheels: Three 3.5" (89mm) foam, one 1" (25mm) tailwheel
- Aileron Control: Dual servo. Plane is intended to be flown with flaps
- using at least a 5-channel radio. If a 4-channel radio is used, the
- flaps must be linked to the aileron servos using Y-harnesses
- resulting in all 4 control surfaces functioning as ailerons
- Building Time: Ready to fly in 10-15 hours
|
|
|
 |
|
 |
|
|
|
