FUTR14MZA-2.4 FUTABA 14MZ 14-Channel 2.4GHz Air Transmitter/Receiver

• Transmitter;
• Operating System: 2-stick 14 channels, PCM-G3 synthesizer system
• Transmitting Frequency: 2.4GHz, 72Mhz, or 50Mhz
• Modulation: PCM-G3, PCM1024 or FM/PPM switchable
• Power Supply: 7.4V LT2F2200 Lithium Ion battery
• Current Drain: 1A maximum (RF power on and back light on)
• 700mA average

INCLUDES:  14MZ Transmitter
          2.4GHz TM-14 Module                              FUTL8934
          R6014 2.4GHz FASST 14-Channel Receiver           FUTL7644
          Data pack memory card
          LT2F2200 7.4V Lithium Ion transmitter battery    FUTM1475
          100 - 240V AC LBC-1D5 Lithium Ion Transmitter Battery Charger
           (FUTM1700), only includes 120V AC United States Standard Input Plug
          Aluminum case with fully padded interior, two lockable latches and
            two keys
          Switch harness
          Aileron extension cord
          Y-harness
          DSC (Direct Servo Control) cord
          Woven adjustable neck strap
          Rubber tipped stylus pen for touch panel, dress nut wrench, 2.5mm
            and 1.5mm hex wrench
          Instruction manual

REQUIRES:  Charging batteries before use
          Servos of modeler's choice
          4.8V receiver battery of modeler's choice

COMMENTS:  For a true mode change on this radio it must be sent to the Futaba service center, as the sticks will need to be recalibrated.

If your transmitter's region code is something other than the United States,the TM-14 Module sold in the United States is not compatible with this transmitter.  
As such, it is necessary to purchase the TM-14 module which matches the region code of the transmitter.


GENERAL FEATURES:
          Real-Time Response
            Double the resolution of PCM1024, the 14MZ's breakthrough PCM G3
            2048 enables servos to pick up even the slightest stick movements.
            It's the closest to actual real-time response possible, for
            unprecedented speed and precision. The 14MZ is also backwards-
            compatible, so pilots can still use 1024PCM and PPM receivers

          Large Color Touch Screen
            Only one company in the world could make the 14MZ display...it's
            an engineering triumph in itself. The HGVA screen features
            crystal clear 640x240 pixel resolution. It uses transflective
            technology (layered transparent and reflective surfaces)
            plus adjustable backlighting and contrast for easy visibility,
            even in direct sunlight. Menu navigations and selections
            can be made by touching the screen-or use the Dial-N-Key button
            to scroll and select

          Dual Internal Processors
            The 14MZ takes advantage of two separate internal processors for
            maximum efficiency and reliability. A custom Futaba processor
            expertly directs all functions dedicated to flight control. Input
            for general operating tasks-such as set-up and programming-is
            processed by Windows CE.

          Pre-Programmed Mixes
            Numerous aircraft configurations are already programmed in. Just
            select the needed setup

          Servo Grouping
            Multiple servos controlling a single function can be set up
            through the transmitter and then plugged into differently
            adjustable receiver channels (even non-consecutively) without
            needing a separate servo synchronizer for mixing.

          Switch Customizing
            The eight shoulder switches can be reconfigured to your own
            preference-just pull out switch and plug in the preferred style,
            tall or short, button or toggle, spring-loaded or positionable.

          R6014FS Receiver;
            Futaba advanced technology allows this receiver to be the first
            2.4GHz receiver able to utilize all 14 channels. It retains
            G3 2048 resolution and Futaba Real Time Response from the
            72MHz version.
            Simple one-touch binding - no plugs to mess with or lose
            A full range system for all aircraft from giant scale to
            Park Flyer applications-no need to buy separate receiver for
            specific aircraft
            Dual Antenna Diversity allows 2.4GHz FASST Futaba transmitter to
            select the best reception between the two receiver antennas with
            no signal loss
            Rubber grommets installed where antennas exit to eliminate stress
            and fraying of the two antenna wires

          Lithium-Ion Transmitter Battery
            Even with the 14MZ transmitter's brilliant, full-color display,
            fliers will enjoy 2-3 hours of operating time per charge from the
            included 7.4V, 2200mAh Lithium-Ion battery pack

          Compact Flash Card Data Storage & Transfer
            Built-in 30-model memory, which can be expanded to 100 models
            using the supplied Flash memory card. Upload digital images of
            your aircraft for use as model names on the graphic menu. Create
            and store audio files enabling you to fly to music or flight call
            sequences.
            The transmitter also includes a built-in mic for recording and
            storing up to 24 voice prompts, such as "Landing gear down" and
            "Full throttle!"  These prompts can be assigned to specific
            switches and functions so that audio confirmations of proper
            stick movement are heard through the transmitter's speaker.