|
|
 |
 |
 |
|
Associated ZR.30 Spec.2 Pull Start
This is the LRP ZR.30 Spec. 2 Monster Truck Engine with Pull Starter.
FEATURES: LRP XTEC crankcase constructed of T6 aluminum, black in color
Aluminum body slide valve LRP XTEC carburetor with 9mm venturi
SG (pilot) type 14.0mm/10.0mm bore triple turbo scoop crankshaft
Lightened piston constructed of high silicium alloy
ABC cylinder liner construction "A"lloy piston with "B"rass cylinder
liner that is "C"hrome plated
Extra strong aluminum knife-edge shaped connecting rod with double
bushings
INCLUDES: LRP ZR.30 Spec. 2 Monster Truck Engine with Pull Starter, standard
glow plug, tapered cone, parts list, decals, exhaust gasket and
instructions
REQUIRES: Fuel with 25% nitro content, 2-stroke model car fuel
Exhaust system depending on application, LRP Monster Truck Pipe Set
Air filter, plug wrench and track equipment
SPECS: Displacement: .30 cu in (4.92cc)
Exhaust: Rear, round
Bore: 19.20mm
Stroke: 17.00mm
Number of Ports: 5+1 (5x transfer, 1x exhaust port)
Power Output: 4.12 PS*
Max RPM: 33,200*
Weight: 15.2oz (430g)
Distance Between Mounting Holes Same Side: 0.87" (22mm)
Distance Between Mounting Holes Opposite Side: 1.5" (37.5mm)
Height/Bottom of Mounting Tab/Top of Cylinder Head: 3.8" (97.5mm)
Distance from Pull Starter to Front Bearing: 3.4" (85.5mm)
Distance from Pull Starter to End of Crankshaft: 4.6" (116mm)
Width at Mounting Tabs: 1.7" (43.5mm)
Width Below Mounting Tabs: 1.2" (31.2mm)
Diameter of Exhaust Outlet: 0.75" (19mm) including gasket
Carburetor Settings: Mid Range, 2.25 turns from closed
Main, 2.75 turns from closed
*Power Output and Max RPM may vary depending on fuel, exhaust system
and tuning
Added: 18 MAY 09
Quantity in Stock: 2
Product Code: ASCLRP32810
|
|
|
|
|
|
 |
|
 |
|
|
